PRO USB Driver Cable CP-W126 Coupler NP-W126 Dummy Battery QC3.0 Charger for Fujifilm X-A2 A3 X-T10 X-E2s X-Pro2 X-T20 XT-1 X-E3

★ USB Power Charger Adapter QC3.0 + USB DC drive Cable for Indoor long time photography, Mobile power bank QC2.0/3.0 + usb dc drive cable for outdoor long time photography

★ Intelligent analysis within five seconds after the "QC pro cable" is energized, based on the smart output of the camera's required operating power. it is more suitable for the momentary power demand of the camera shutter.

★ When we disconnect the USB power supply, the usb drive cable will have a short Slight" squeak" noise for a short time, which is a normal phenomenon of the Farah capacitor discharge.

★ When "PRO usb cable" plug into an ordinary USB powered interface (If not qc2.0/qc3.0), his voltage will be intelligently analyzed as a 5V output.Multimeter test no-load Non-operating voltage is 9V.

★Recommend that users use high-quality mobile power bank, or other brand power bank supplies use chips that support large current discharges, such as the 10A switching current of the TI chip TPS61088, fits instantaneous high power needs of the camera.

"PRO USB Cable" intelligently supply, the camera for sufficient instantaneous power.

USB Input: Smart Charge QC3.0 / QC2.0 (5V 2A-3A, 9V 2A, 12V 1.5A).

DC Output:8.4V/8.7V/9V.

Usb Cable Length:95cm-100cm

QC3.0 USB Charger Specifications:

Item Type: QC 3.0 Quick Charging Wall Charger Adapter

Interface: USB 3.0

Input: AC 100-240V 50/60Hz 0.5A

Quick Charge 3.0 Port: Output: DC 12V/1.5A, DC 9V/2A, DC 5V/3A

DC drive cable It works wonderfully:

For Fujifilm X-Pro1

For Fujifilm X-Pro2

For Fujifilm X-E1

For Fujifilm X-E2

For Fujifilm X-E2S

For Fujifilm X-E3

For Fujifilm X-M1

For Fujifilm X-A2

For Fujifilm X-A1

For Fujifilm X-T1

For Fujifilm X-T10

For Fujifilm X-T20

For Fujifilm HS50EXR

For Fujifilm HS33EXR

For Fujifilm HS35EXR

Package Includes:

1 x PRO USB Drive Cable

1 x DC Coupler CP-W126

1 x QC 3.0 USB Charger

1 x Manual

As the battery compartment cover cann't be closed, there may be CP-W126 dummy battery, can not be normal contact.

By one of the following two ways to solve:

(1)The end of the virtual battery plus some thick paper

(2)The battery metal contacts are pulled a little higher